specifications and other details please check our website at
Bulbed Cherrymax® Rivets
Bulbed CherryMAX® is a high stem retention lock spindle
blind rivet with a visibly inspectable mechanical locking device.
CherryMAX® blind rivet system retains the large blind head of
the Bulbed CherryLOCK® rivet. Each rivet is supplied with its own
installation anvil which eliminates the problems resulting from
worn anvils. CherryMAX® fasteners are currently available in
1/8" through 1/4" diameter in both nominal and 1/64" oversize
diameters. The tools utilize one pulling head to install many
diameters, head configurations and material combinations.
Wiredraw cherrymax® ‘aB’ rivets
CherryMAX® ‘AB’ rivets are shank expanding, locked-spindle,
flush fracturing rivets meeting the requirements of NAS 1400
specification and conforming to NAS 1398/1399 ‘AB’ code
standard pages, but offering non-shift tooling installation without
changing pulling heads.
Cherry Maxibolt® blind bolts
The Cherry MaxiBOLT® Blind Bolt alloy steel and A286 CRES
conforms to NAS M90353/90354 and NAS M21140/21141, and
meets the requirements of MIL-F-81177 and MIL-F-8975 and is
listed in QPL81177 and QPL8975.
bulbed cherrylock® Rivets
The Bulbed CherryLOCK® is a high strength bulb rivet system
with a visible, inspectable locking collar. Available in 1/8"
through 3/16" diameters, several head styles and various
material strengths and combinations. Conforms to NAS
1740 specification and NAS 1738/1739 standards pages.
wiredraw cherrylock® rivets
Wiredraw holefilling CherryLOCK® rivets offer the widest range
of sizes (3/32" through 1/4" diameters), materials and strength
levels of any blind fastening system. Conforms to NAS 1400
specification and NAS 1398/1399 standards pages.
cherry® nut-plate rivets
Cherry® Nut-plate blind rivets are manufactured in 3/32" and
1/8" diameters, steel or CRES, for quickly and economically
installing nut-plates to NAS M25027 requirements, with one
operator. There are no blind side or limited accessibility problems,
no damage or distortion to the surrounding material or nut
baskets. They are available in pull-through or self-plugging
styles and may be installed with hand or pneumatic tools.
Cherry® MS self-plugging and pull-through rivets and tooling
systems have been a reliable standard of the industry since
their introduction. Although superseded by the locked-spindle
specifications NAS 1400 and NAS 1740, Cherry® MS rivets are
still widely used under MS20600/01/04/05 part numbers.
cherry sst® blind rivets
The Cherry SST® Blind Rivet System was designed to solve many
of the blind fastening problems associated with aircraft assemblies
requiring superior sheet take-up. Installation of the SST Blind
Rivet System ensures consistent and permanent fastening of
difficult assemblies with inherent gapping or slightly misaligned
holes. The SST Blind Rivet System can be installed with standard
CherryMAX® tooling with no adjustments needed. Eliminate
sheet gaps in your toughest assemblies. Nominal and oversize
in -4, -5, and -6 diameters are available in three head styles,
universal, 100° flush and 100° reduced flush (NAS 1097).
Self-plugging rivet (SPR®)
Cherry® 3/32" Self Plugging, locked spindle blind rivets are
designed for the attachment of nut plates and other applications
requiring the use of a 3/32” diameter, aluminum sleeve, self
plugging rivet. They meet and exceed strength requirements
of Mil-N-25027 for torque-out and push-out of nut plates.
The Cherry® CCR284 Tacking Rivet is designed to improve
drill-out by using external splines on the rivet shank to
prevent rotation. The Cherry® Blind Tacking Rivet System
is available with a 5056 sleeve and a C-1018 steel stem.
Sleeve finishes include clear, red or black anodize.
The Chobert® speed fastening design provides customers with
a rapid assembly system. Chobert® rivets are installed by the
customer on a re-usable mandrel. The installation process is
simple and efficient; successive rivets are installed in pre-drilled
holes on each cycle of the installation tool's trigger.
The industry approved MBC® system is one of the industry’s
simplest and most versatile riveting systems available today.
This lightweight high-strength riveting system features a flush
breaking stem. The mechanically locked stem contributes
substantially to the integrity and performance of the fastener.
The SP rivet provides the aerospace customer with a
reliable and time-proven self-plugging blind fastener.
The SP products are qualified to SBAC standards
The Cherry Lockbolt Pins and Collars are two piece structural
fasteners available in a variety of materials and configurations.
The pins are available as “pull” or “stump” types in 1/8” through
3/8 diameters (nominal and oversize). They are manufactured to
applicable NAS standards from Aluminum, CRES or Steel with
protruding and flush head styles. Our Collars conform to NAS1080
and are manufactured from Steel, CRES, Monel or Aluminum.”
Shear pin fasteners
cherrybuck® 95 ksi one-piece shear pins
The CherryBUCK® shear pin is a bi-metal, one piece fastener
which combines a 95ksi shear 6Al-4V titanium shank with a
ductile Ti/Cb tail to provide weight savings over two-piece,
pin and collar, shear pin fasteners and reduce installation
costs through one-piece automated riveting equipment.
Cherry e-z buck® shear pins
Cherry E-Z BUCK® is a 50 ksi ductile Ti/Cb alloy solid
rivet. Its ductility eliminates the sheet distortion found
when using monel rivets. The Ti/Cb alloy provides
weight savings of 33% over monel and 26% over A-286
CRES rivets. Cherry E-Z BUCK® titanium alloy rivets are
complementary to CherryBUCK® bimetallic titanium rivets.
fasteners for composite
The Cherry 1900 is manufactured to meet NAS1919 and
NAS1921 and is available in all sizes and materials. This
fastener has become a fastener of choice in many aircraft
designs because of the increased use of composites. Our
“Shift Washer” design extends the tool life and utilizes the
Cherry “one tool concept” making the logistics of installing
different sizes and types of fasteners much simpler.
Titanium MaxiBOLT® Blind Bolts feature expanded performance
capabilities for metallic and composite blind fastening
applications. They provide a flush, burr-free installation with
no shaving required. The Titanium MaxiBOLT® offers fast and
consistent installation by utilizing single action tooling with
a patented shift washer design. The all titanium sleeve and
stem are compatible with exotic composite materials, they
cause no delamination of the exit side of the structure during
installation and offer a blindside slope tolerance up to 7°.
Tufthane coated Cherry® rivets are designed for use
in composites. The Tufthane coating is applied directly
to aluminum or other sleeve material fasteners to
provide a barrier against corrosion attack.
Cherry hollow end e-z buck®
The Cherry HOLLOW END E-Z BUCK® is a double flush, cavity
type rivet of TI/Cb material uniquely designed for use in a
“soft” upset that prevents damage to the composite material.
For over 70 years, the Cherry installation tools have been used
by aircraft manufacturers and repair facilities throughout the
world. Ergonomics, reliability and robustness backed by the Cherry
Warranty and Technical Assistance are the leading characteristics
of our tools. There are four types of riveters also available in a
“split” version, in which a light hand held unit is connected by
hoses to a remote power unit.
• Non-shifting riveters: only the active piston stroke provides
• Lockbolt Riveters: both the active and the return piston stroke
• Shifting (Double Action) Riveters: these Cherrylock™ riveters
have two pistons working together to complete the fastener
• Hand Powered Riveters: Operated by hand power, our G800
weighs less than 2 Lbs. and provides up to 5000 Lbs.of pull
We also offer a wide variety of straight, offset and right angle
pulling heads, adaptors, tool and service kits. For assistance please
contact us at 714-545-5511; we would be happy to help.
青島AG8亚游官网貿易有限公司 © 版權所有 魯ICP備17051554號-1 魯公網安備 37020302370677 號技術支持 ： 海誠互聯